Description: :

PT tubes are applicable to the checks for blood coagulation. The vacuum tubes are designed according to the 1:9 proportions of anti-coagulants and blood samples. It can ensure an accurate blood dosage and anti-coagulants quantity as well as the high precision. Because the low toxicity of the sodium citrate, it can also be used to the blood storage.
Product DescriptionRemark

　　Color Code: Blue
　　Specifications: Ø13x75mm
　　General Sampling Dosage: 1.8ml, 2.7ml
　　Type of Additive: 3.28% sodium citrate
　　Operation Temperature: 0 ℃-37 ℃
　　Maximum Vacuum Tolerance: ±5%
　　Attentions: During the operation, care for the followings:
　　1. Soon after blood sampling．mixing it 5-6 times by turning the tube 180°.
　　2. Sampling the dosage as required to ensure the test accuracy.
　　3. This tube is suitable fixed to the double direction flexible needles.

Description: :

The tubes are specially used for determination of the erythrocyte sedimentation rate (ESR) by the Westergren's Method. The mixing ratio is 1 part citrate solution to 4 parts blood. ESR measurements refer to the Westergren method.
Product DescriptionRemark

　　Golor Gode: Black
　　Specifications: Ø13x75mm
　　General Sampling Dosage: 1.6ml, 2.4ml
　　Type of Additive: 3.8% sodium citrate
　　Maximum Vacuum Tolerance: ≤5%
　　Attentions: During the operation, do pay attentions to the followings:
　　1. As soon as the sampling, upside down the tube by 180°shaking and fixing fully.
　　2. Sampling the blood dosage as required to ensuring the test accuracy.

Description: :

The heparin tubes are use to blood sampling in clinical biochestry, emergency care biochemical and hemorrheological tests.
Product DescriptionRemark

　　Color Code: Green
　　Specifications: Ø13x75mm, Ø13xl00mm
　　General Sampling Dosage: 2ml, 3ml, 4ml, 5ml, 6ml, 7ml
　　Types of Additives: Sodium Heparin, lithium Heparin
　　Maximum Centrifuge Speed: 5000 turns/min.
　　Maximum Vacuum Tolerance: ±10%
　　Attentions: During the Operation, do please care for the followings:
　　1. Soon after the sampling, turn the tube 180°upside down,shaking and mixing 5-6 times.
　　2. Sampie the dosage as required in order to avoiding the inabiIity of the determination of the calcium due to the relative higher content of the heparin.
　　3. Heparin Anti-coagulation Blood sample should be used within 6 hours after sampling, otherwise, the blood will coagulate again..

Description: :

The tubes are applicable to the clinical blood test and suitable for the blood cells analysis. The internal walls of the tubes are coated with the anti-sticking agent, and meanwhile add the anti-coagulant. EDTA anti-coagulant has low effects on the blood cell integration and blood cells configuration, which can restrain the platelets integration.
Product DescriptionRemark

　　Color Code: Purple
　　Specifications: Ø13x75mm
　　General Sampling Dosage: 2ml, 3ml, 4ml, 5ml
　　Types of additives: EDTAK2, EDTAK3, EDTANa2
　　Operation Temperature: 0 ℃-37 ℃
　　Maximum Vacuum Tolerance: ±10%

Description: :

The tubes are applicable to the blood samples test on the aspects of blood sugarsugar tolerance, red blood cell electrophoresis, Alkali-Resistant HB Determination, and sugar dissolution. Due to the add of the inhibitor and special process of the internal tube walls, it can maintain the blood original characters for a long time, and the metabolism of the RBC relative ceased.
Product DescriptionRemark

　　Color Code: Gray
　　Specifications: Ø13 x75mm,Ø13 x100mm
　　Normal Sampling Dosage: 2ml, 3ml, 4ml, 5ml
　　Types of the Additives: Sodium Fluoride + Potassium Oxalate 　Sodium Fluoried + Sodium Heparin
　　Maximum Centrifugal Rotating Speed: 5000 turns/min.
　　Maximum Vacuum Tolerance: ≤5%
　　Attentions: Because the Sodium Fluoride has a good effect of preventing the blood sugar from degradation, turning the tube 180°,
　　upside down, shaking and mixing 5-6 times slowly..

Description: :

The tubes are use to the blood sampling for biochemical, immunization test. The internal walls are coated with the anti-wall sticking agent and meanwhile add the pro-coagulant, which has the characters of temperature flexible, fast coagulation, fibrin never recur.
Product DescriptionRemark

　　Color Code: Nacarat
　　Specifications: Ø13x75mm, Ø13x100mm
　　Normal Sampling Dosage: 2ml, 3ml, 4ml, 5ml, 6ml, 7ml
　　Coagulation Time: 10-30 Minutes
　　Maximum Centrifugal Speed: 5000 turns/min.
　　Operation Temperature: 0 ℃-37 ℃
　　Maximum Vacuum Tolerance: ±10%
　　Cloting Time: When the platelets are normal, the coagulation time is not more than 5 minutes.
　　Attentions:
　　1. Soon after the sampling, turn the tube 180°upside down, shaking and mixing for 5-6 times. Only can centrifuge the sample till the
　　blood coagulated completely.
　　2. When the sampling dosage are not more than the required dosage, please drain the vacuum in the tubes.

Description: :

The tubes are applicable to blood serum biochemical test, immunization test, and drug test etc.the internal walls are Coated with pro-coagulant which and shorten the coagulation time significantly. Using the imported separation gel to prevent the protein in serum from adhesion and maintain a stable status. The centrifuged separation gel is solidified and forming a barrier to separate the serum from blood red cells and stop the exchange of the substances between them. Thus obtain the high quality serum.
Product DescriptionRemark

　　Color Code: Yellow
　　Specifications: Ø13x75mm, Ø13x100mm
　　Normal Sampling Dosage: 2ml, 3ml, 4ml, 5ml, 6ml
　　Complete Coagulation Time: 10-30 Minutes
　　Maximum Centrifugal Speed: 5000 turns/min.
　　Operation Temperature: 0 ℃-37 ℃
　　Maximum Vacuum Tolerance: ±10%
　　Attentions:
　　1. Soon after the blood sampling, turn the tube 180° upside down, shaking and mixing 5-6 times.
　　2. In order to help the gel to form a barrier, only can centrifuge the blood 8-10 minutes till the blood coagulated completely..